Yealink T4 Series IP Phones User Guide110Parking or Retrieving a Call with a Park/Retrieve KeyYou can easily use a Park key to park a call to a specific extension (if the FAC mode is set) or shared parking lot (if theTransfer mode is set), and quickly retrieve this parked call using a retrieve key.TopicsSetting a Park KeyParking a Call using a Park KeySetting a Retrieve KeyRetrieving a Parked Call using a Retrieve KeySetting a Park KeyYou can set a line key as a Park key, and specify an extension or a shared parking lot you want to park a call to for thiskey.Before You BeginCheck with your system administrator if the FAC or Transfer mode is set on your phone. Check with your system admin-istrator if Account ID it is necessary for this key.Procedure1. Navigate to Menu->Features->DSS Keys, and then select a desired line key.2. Select Key Event from the Type field.3. Select Call Park from Key Type field.4. (Optional.) Select the desired line from the Account ID field.5. Do one of the following:l (Optional.) Enter the string that will appear on the LCD screen in the Label field.Enter the park extension number or the shared parking lot you want to park the call to in the Value field.l For theSIP-T46S/T46G IP phone, highlight the Label or Value field. Press Directory (Dir) and then select a desiredcontact from the Directory list(s).For the SIP-T48S/T48G IP phone, tap , and then tap the desired contact.6. Press Save.TipBy default, you can long press a desired line key to set it. But your system administrator can configure the phone to enterthe Add Contact screen by long pressing the line key.Parking a Call using a Park KeyBefore You BeginYou need to set a Park key with a specific extension or a shared parking lot.Procedure1. During a call, press the Park key.The call is parked to the desired extension or the shared parking lot directly.Related TopicsSetting a Park Key
