Call Features89Performing a Semi-Attended/Attended TransferYou can transfer a call to another contact immediately when receiving ringback or after consulting with her/him first.Procedure1. Press the TRANSFERkey or Transfer (Trans) during a call.2. Do one of the following:l Enter the number or select a contact from the placed call list you want to transfer the call to.l Press Directory (Dir). Select a desired contact from the Directory list(s).On the SIP-T48S/T48G IP phone, tap the Directory or History. Tap the desired contact.3. Press the OK key or Send.4. Do one of the following:l When you hear the ringback tone, press the TRANSFERkey or Transfer (Trans) to finish a semi-attended transfer.l After the contact answers the call, press the TRANSFERkey or Transfer (Trans) to finish an attended transfer.TipIf you are using a handset, the transfer can be completed by hanging up the handset.Related TopicsSetting a Speed Dial Key ManuallyPerforming Transfer with a Transfer KeyPerforming Transfer to an Existing CallIf there are multiple calls on the SIP-T42S/T42G/T41S/T41P/T40P/T40G phone, you can transfer a call to an existing call.Before You BeginYour system administrator has enabled the Allow Trans Exist Call feature.Procedure1. Press the TRANSFER key or Transfer (Trans) during a call.2. Select the desired hold call you want to transfer the call to, and then press Select.The call is then connected to the call which you are transferring to.
