Advanced Features115Picking up a Remote Call by BLF KeyWhen a monitored line receives an incoming call, you can pick up the incoming call by pressing the BLF key. Forexample, if the monitor user is not at his/her desk and someone rings his/her line, you can pick up the call simply bypressing the flashing BLF key.Before picking up an incoming call, make sure that the directed call pickup code has been configured in advance.TopicsSetting the Directed Call Pickup Code for BLF keyPicking up a Remote CallSetting the Directed Call Pickup Code for BLF keyIf your system administrator set the directed call pickup code in advance, you can use the BLF key to pick up the calldirectly. If not or if you want to set a pickup code for a specific BLF line, you can set a pickup code for BLF key manu-ally.Before You BeginYou need to set a BLF key and get the directed call pickup code from your system administrator.Procedure1. Long press the BLF key.2. Enter the directed call pickup code in the Extension field.3. Press Save.Related TopicsSetting a BLF KeyPicking up a Remote CallWhen the monitored line receives an incoming call, the BLF key LED indicator of the monitored line will flash red(except the SIP-T48S/T48G IP phone). On the SIP-T48S/T48G IP phone, the BLF key icon indicator of the monitored linewill become and flashing.Before You BeginMake sure that the directed call pick up code for a BLF key or your system administrator has set the call pickup feature.Procedure1. Pressing the BLF key to pick up the call to monitored line directly.Related TopicsSetting the Directed Call Pickup Code for BLF keyTransferring a Call by BLF KeyWhen there is already an active call on the IP phone, you can transfer the active call to the monitored line by pressingthe BLF key.The phone transfers (Blind Transfer or Attended Transfer) the active call differently depending on the Transfer Mode viaDsskey feature configured by your system administrator.
