Call Features85l Manually forwarding an incoming call to a number.TopicsForwarding All Incoming Calls to a ContactForwarding an Incoming Call ManuallyForwarding Incoming Calls with a Forward KeyForwarding All Incoming Calls to a ContactYou can set up your phone to forward all incoming calls to a contact with one of the following types:l Always Forward: Forwards all incoming calls immediately.l Busy Forward: Forwards incoming calls when you are busy in a call.l No Answer Forward: Forwards incoming calls when no one answers the calls.TopicsForwarding All Incoming Calls on All LinesForwarding All Incoming Calls on Specific LinesDeactivating Call ForwardForwarding All Incoming Calls on All LinesBefore You BeginCheck with your system administrator if the forward on code or off code is required. If required, get it from your systemadministrator.Procedure1. Navigate to Menu->Features->Call Forward.2. Select a desired forwarding type and select Enabled from the corresponding field.For the SIP-T48S/T48G IP phone, tap the On radio box of the corresponding field.3. Do one of the following:l Enter the contact number you want to forward incoming calls to in the Forward to field.l For the SIP-T46S/T46G IP phone, highlight the Forward to field. Press Directory (Dir), and then select a desiredcontact from the Directory list(s).For the SIP-T48S/T48G IP phone, tap , and then tap the desired contact.4. If you select the No Answer Forward option, select the desired ring time to wait before forwarding from the AfterRing Time field.5. (Optional.) Enter the always/busy/no answer forward on code or off code respectively in the On Code or Off Codefield.6. Press Save.The call forward icon on the Idle screen indicates that the call forward is activated.TipWhen the phone is idle, you can press a Forward key to activate always forward feature to a specific contact.Forwarding All Incoming Calls on Specific LinesBy default, the forward setting applies to all lines on your phone. Your system administrator can change the forwardmode to Custom so that you can set Forward setting for specific lines.Before You Begin
