Call Features77Related TopicsEnabling Call WaitingEnabling Call WaitingCall waiting enables you to receive another call when there is already an active call on your phone. If it is disabled, thenew incoming call will be rejected automatically.You can enable call waiting feature to avoid missing important calls during a call. You can also set the phone to play awarning tone when the new incoming call arrives.Before You BeginCheck with your system administrator if the call waiting on code or off code is required. If required, get it from your sys-tem administrator.Procedure1. Navigate to Menu->Features->Call Waiting.2. Select Enabled from the Call Waiting field.For the SIP-T48S/T48G IP phone, tap the On radio box of the Call Waiting field.3. Select Enabled from the Play Tone field.For the SIP-T48S/T48G IP phone, tap the On radio box of the Play Tone field.4. (Optional.) Enter the call waiting on code or off code respectively in the On Code or Off Code field.5. Press Save.Answering Calls AutomaticallyAuto answer enables you to automatically answer an incoming call in speakerphone (hands-free) mode when yourphone is idle.NoteWhen you are in an active call and an incoming call arrives on the phone, the incoming call will not be automaticallyanswered even if auto answer is enabled.Your system administrator can configure the phone to automatically answer the incoming call after ending all calls. Checkwith your system administrator to find out if it is available on your phone.Procedure1. Navigate to Menu->Features->Auto Answer.2. Select a desired line.3. Select Enabled from the Auto Answer field.For the SIP-T48S/T48G IP phone, tap the On radio box of the desired line.For the SIP-T42S/T42G/T41S/T41P/T40P/T40G IP phone, select Enabled from the Status field.4. Press Save.If the auto answer feature is enabled for the default account, the auto answer icon appears on the phone screen.
