Optional Accessories with Your Phone143Connecting to an Available Wireless Network ManuallyBefore You BeginGet the password of the wireless network from your system administrator. Make sure that the Wi-Fi mode is activated.Procedure1. Navigate to Menu->Basic->Wi-Fi.On the SIP-T42S/T41S IP phone, navigate to Menu->Settings->Basic Settings->Wi-Fi.2. On the SIP-T46S/T46G/T42S/T41S IP phone, highlight the X Available Network(s) (X represents the number of avail-able networks), and then press Enter.3. (Optional.) To re-search the available network, press Scan.4. Select the desired wireless network and then press Connect.On the SIP-T48S/T48G IP phone, tap the desired wireless network to connect to your IP phone. Or tap after thedesired wireless network, and then tap Connect.5. If the network is secure, enter its password.6. Press OK.Related TopicsActivating the Wi-Fi ModeConnecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks which can auto-matically configure a wireless network with a network name (SSID) and strong WPA data encryption and authen-tication.There are two methods supported by Yealink IP phones in the Wi-Fi protected setup:l Push Button Configuration (PBC): The user simply has to press WPS key on both the IP phone and gateway/routerto connect.l Personal Identification Number (PIN): The user has to enter a PIN generated randomly by the IP phone on the gate-way/router to connect.Before You BeginMake sure that the Wi-Fi mode is activated.Push Button Configuration (PBC)Procedure1. Navigate to Menu->Basic->Wi-Fi.On the SIP-T42S/T41S IP phone, navigate to Menu->Settings->Basic Settings->Wi-Fi.2. Press the WPS, and then select WPS.On the SIP-T48S/T48G IP phone, tap WPS.The LCD screen prompts “WPS has been activated, connect in 120s!”.3. Long press the WPS key on your gateway/router.Once WPS setup has completed successfully, the LCD screen will prompt “Connect Success.”.Personal Identification Number (PIN)
