Endpoint Maintenance225When factory resetting the video endpoint, the following happens: The call logs will be deleted. Passwords will be reset to default. All system parameters will be reset to default values. All custom files will be deleted. Such as, certificates, local contacts and registeredaccounts.It is not possible to undo a factory reset. But you can export the configuration first, andthen you can re-import the configuration to recovery the endpoint after the reset.You can reset the endpoint via the reset key on the VC110 all-in-one unit, remote controlor web user interface.NoteTo reset the endpoint via web user interface:1. Click on Setting->Upgrade.2. Click Reset to Factory Setting in the Reset to Factory field.The web user interface prompts the message ―Reset your machine?‖.3. Click Confirm to confirm the resetting.To reset the endpoint via the remote control:1. Select Menu ->Advanced (default password: 0000)->Reboot & Reset2. Select Reset, and then press .The display device prompts‖ Reset to Factory? ‖3. Select OK, and then press .The endpoint reboots automatically. The endpoint will reset to factory sucessfullyafter startup.Reset of the endpoint may take a few minutes. Do not power off until the phone starts upsuccessfully.
