Yealink VC110 Administrator's Manual

Also see for VC110: Getting started Recovery guide Quick start guide User guide User guide

Contents

Troubleshooting2394. Press or to adjust the focus.If the camera can move and zoom normally, it means that the camera worksproperly.5. Press the Back soft key to stop camera diagnose.To diagnose network via the remote control:1. Select Menu->Diagnose menu.2. Select Ping, and then press .3. Enter IP address (for example, the IP address of the far site).4. Press Start, and then press .The display device displays the network diagnose information.5. Press the Back soft key to return to the Diagnose menu.It measures the round-trip time from transmission to reception and reports errorsand packet loss. The results of the test include a statistical summary of the responsepackets received, including the minimum, maximum, and the mean round-triptimes.Trace Route:1. Select Menu->Diagnose menu.2. Select Trace Route, and then press .3. Enter IP address (for example, the IP address of the far site).4. Press Start, and then press .The display device displays the network diagnose information.5. Press the Back soft key to return to the Diagnose menu.If the test is successful, the VC110 endpoint lists the hops between the endpoint andthe IP address you entered. You can check whether congestion happens via thetime cost between hops.To diagnose network via web user interface:1. Click on Network ->Diagnose.2. Select the desired diagnostic method from the pull-down list of Command.3. Enter IP address in the IP Address field.4. Click Start to start diagnosing.