Yealink VC110 Administrator's Manual

Also see for VC110: Getting started Recovery guide Quick start guide User guide User guide

Contents

Configuring Network775. Click Confirm to accept the change.A dialog box pops up to prompt that the settings will take effect after a reboot.6. Click OK to reboot the phone.To configure VLAN via the remote control:1. Select Menu->Advanced (default password: 0000) ->Advanced Network.2. In the VLAN block, check the Active checkbox.3. Enter the VLAN ID in the VID(1-4094) field.4. Enter the priority value (0-7) in the Priority field.5. Press the Save soft key to accept the change.The display device prompts ―Reboot now?‖.6. Select OK to reboot the endpoint immediately.The endpoint supports VLAN discovery via DHCP. When the VLAN Discovery method isset to DHCP, the endpoint will examine the DHCP option for a valid VLAN ID. Thepredefined option 132 is used to supply the VLAN ID by default. You can customize theDHCP option used to request the VLAN ID.Parameters of VLAN feature on the endpoint are described below.Parameter Description Configuration MethodDHCPVLAN->ActiveEnables or disables the DHCPVLAN discovery feature on theendpoint.Default: EnabledNote: If you change thisparameter, the endpoint willreboot to make the change takeeffect.Web User InterfaceOptionConfigures the DHCP option fromwhich the endpoint obtains theVLAN settings.You can configure at most fiveDHCP options and separate themby commas.Valid Values: 128-254Default: 132Note: If you change thisparameter, the endpoint willWeb User Interface