Configuring Network73TLV Type TLV Name DescriptionSystem DescriptionDescription of the endpoint.Description includes firmware version ofthe endpoint.System CapabilitiesThe supported and enabled endpointcapabilities.The Telephone capability is supportedand enabled by default.Port DescriptionDescription of port that sends data unit.The default value is ―WAN PORT‖.IEEE Std 802.3OrganizationallySpecific TLVMAC/PHYConfiguration/StatusDuplex mode and network speedsettings of the endpoint.The Auto Negotiation is supported andenabled by default.The advertised capabilities of PMD.Auto-Negotiation is:100BASE-TX (full duplex mode)100BASE-TX (half duplex mode)10BASE-T (full duplex mode)10BASE-T (half duplex mode)TIAOrganizationallySpecific TLVsMedia CapabilitiesThe MED device type of the endpoint andthe supported LLDP-MED TLV type can beencapsulated in LLDPDU.The supported LLDP-MED TLV types are:LLDP-MED Capabilities, Network Policy,Extended Power via MDI-PD, Inventory.Network Policy Port VLAN ID, application type, L2 priorityand DSCP value.ExtendedPower-via-MDI Power type, source, priority and value.Inventory –Hardware Revision Hardware revision of the endpoint.Inventory –Firmware Revision Firmware revision of the endpoint.Inventory –Software Revision Software revision of the endpoint.Inventory – Serial Serial number of the endpoint.
