Yealink VC110 Administrator's Manual

Also see for VC110: Getting started Recovery guide Quick start guide User guide User guide

Contents

Getting Started41This chapter provides basic information and installation instructions for Yealink VC110endpoints in the following sections: Endpoint Connection and Installation Powering the Endpoint On or Off Endpoint Initialization Endpoint Startup Setup Wizard Enabling Communication with Other Endpoints Placing a Test Call from the Yealink VC110 endpointPlacing the EndpointDo not place the camera facing a window or other bright light. Ensure sufficient space toconnect the cables. Ensure all participants are facing both the display device and thecamera at the same time by putting camera and display device together.Endpoint Components InstallationThis section introduces the following: Connecting the VC110 video conferencing endpoint Installing the VC110 video conferencing endpoint Installing batteries in the remote controlNote Up to two display devices can be connected to the VC110 all-in-one unit. Because thedisplay device is not included in the package, you need to purchase it separately ifrequired. Ensure that the purchased display device supports HDMI input.When connecting only one display device to the VC110 all-in-one unit, Display1 port isthe only available port. If dual screen mode is required, you can connect secondarydisplay device to the Display2 port.Because DVI cable is tailor-made, please use the Yealink-supplied DVI cable.To prevent shock, do not connect the power adapter and turn on the power beforeconnecting all endpoint components.