9-6 CHAPTER 9: C ONFIGURING IPX R OUTING3 Define the Route by entering the following fields: Network Address — The address of the network. Gateway Network — The address of the router that joins thenetworks. Gateway Node Address — The hardware address of the gatewaynode. Metric — The number of routers (1-15) through which data packetstravel before reaching their destination. Tick — A tick represents how far away the destination is for a datapacket (in seconds).4 Click Submit. To clear the fields, click Reset.5 To delete a route from your configuration, select the route and clickDelete.Adding a Framed IPXRoute to a RemoteSite (WAN)To add, modify, or delete a framed route to a Remote Site, follow thesesteps:1 Select Configuration > Remote Sites (WAN).2 Select the remote site to modify, and click Modify.3 Continue clicking Next to advance through the ATM Modify, IP Modify,IP Advanced Modify screens to get to the IPX Modify screen.4 Click Framed Routes.5 Click Add to define the following parameters:840ug.book Page 6 Friday, July 7, 2000 2:23 PM
