13-2 CHAPTER 13: TROUBLESHOOTING CLI Traces — Tracing can be turned on for various OfficeConnectRemote 840 software components using the CLI set facility command.This feature is for advanced troubleshooting and should only be usedafter all other methods for isolating the problem have been tried. Youmay find the trace statements to be cryptic.CLI traces are not accessible through the OfficeConnect Remote 840Manager. Refer to the OfficeConnect Remote 840 SDSL Router CLI User'sGuide for more information.TroubleshootingTablesThe troubleshooting tables are organized in a “bottom-up” fashion. Thehardware and line problems are listed first, then the higher level routerconfiguration problems are covered.How to Use theseTablesIf you are having any type of connection problem, e.g., the workstationson the local LAN cannot connect to the remote network, you shouldwork your way down the tables to eliminate any low-level problembefore working through the WAN connection problems.840ug.book Page 2 Friday, July 7, 2000 2:23 PM
