6 NETWORK ADDRESS TRANSLATIONUSING THE O FFICE CONNECTREMOTE 840Introduction This chapter contains information on address translation using theOfficeConnect Remote 840. It is comprised of the following sections: “Selecting Address Translation” “Configuring the PAT Default Address” “Configuring Static PAT Port Entries” “Configuring NAT” “Monitoring”Selecting AddressTranslation You must have a Remote Site Profile already defined to set up addresstranslation for this remote site.1 From the OfficeConnect Remote 840 Manager “home page,” selectConfiguration > Remote Sites > IP Advanced Modify.2 Select the defined site profile and press the Modify button.3 You will then need to advance through the screens by pressing the Nextbutton until you reach the IP Advanced Modify screen:840ug.book Page 1 Friday, July 7, 2000 2:23 PM
