Assigning SNMP Trap Managers 2-7Assigning SNMPTrap ManagersAn SNMP trap is an event that causes the OfficeConnect Remote 840 tosend an unsolicited message to a SNMP manager.These events are generally critical events that indicate an operationalproblem. (Critical events can also be viewed on the OfficeConnectRemote 840 Manager's Monitor > Events > Critical Event Log screen.)To configure the OfficeConnect Remote 840 to send traps, follow theseinstructions:1 From the home page, select Configuration > Global > Administrator> TRAP. Click Add and the following screen fields appear:2 Enter the following fields: Name — Enter the name of the SNMP Trap Manager. Address — Enter the address of the SNMP Trap Manager (e.g.,192.168.200.50).Specifying 0.0.0.0 causes SNMP Traps to be broadcast.3 After the fields have been entered, click Submit. To clear the fields, clickReset.To alter previously set fields, follow step 1 and select an SNMP TrapManager, then click Modify. To delete a server from your configuration,select an SNMP Trap Manager from the TRAP screen and click Delete.840ug.book Page 7 Friday, July 7, 2000 2:23 PM
