6-4 CHAPTER 6: N ETWORK ADDRESS TRANSLATION USING THE OFFICE CONNECT R EMOTE 840After Static Port Entries have been configured, return to the IP AdvancedModify screen and press the Modify button for the changes to takeeffect.Configuring NAT When NAT is configured, static mappings and/or dynamic pools ofaddresses must be configured. Static assignments permanently map aprivate address to a public address. Dynamic pools consist of a start IPaddress, number of addresses in the pool, and a mask to be used forRouting Information Protocol (RIP) messages if the public addresses are tobe advertised. Multiple pools can be assigned and static assignments mayexist within a pool range. Dynamic — Press this button to Add, Delete, or Modify the fields inthe Dynamic NAT table: Static — Press this button to Add, Delete, or Modify the fields inthe Static NAT table:After Static Port Entries have been configured, return to the IP AdvancedModify screen and press the Modify button for the changes to takeeffect.840ug.book Page 4 Friday, July 7, 2000 2:23 PM
