z ive IP ong wand the others are secondary IP addresses. A newly specified primary IP address overwrites theprevious one if there is any.mary and secondary IP addresses of an interface cannot reside on the same networksegment; the IP address of a VLAN interface must not be on the same network segment as that ofe has beenconfigured to obtain an IP address through BOOTP or DHCP.You can assign at most f address to an interface, am hich one is the primary IP addressz The pria loopback interface on a device.z A VLAN interface cannot be configured with a secondary IP address if the interfacFollow these step nfigure static domain name reConfiguring Static Domain Name Resolutions to co solution:To do… Use the command… RemarksEnter system view syste —m-viewConfigure a mapping between ahost name and an IP address ip host hostname ip-addresRequireds No IP address is assigned to a hostname by default.z The IP address you assign to a host name last time will overwrite the previous one if there is any.to 50 static mappings between domain names and IP addresses.z You may create upDisplaying IP Addressing ConfigurationTo do… Use the command… RemarksDisplay static DNS database display ip hostDisplay information about a specified orall Layer 3 interfacesdisplay ip interface [ interface-typeinterface-number ]ormation display ip interface brief [ interface-type-number ] ]Available in anyviewDisplay brief configuration infabout a specified or all Layer 3 interfaces [ interfaceIP Address Configuration ExamplesIP Address Configuration Example INetwork requirementAssign IP address 129.2.2.1 with mask 255.255.255.0 to VLAN-interface 1 of the switch.8-4
