To do… Use the command… RemarksEnter Ethernet port view interface interface-typeinterface-number —Enable NTDP on the port ntdp enable RequiredEnabling the cluster functionFollow these steps to enable the cluster function:To do… Use the command… RemarksEnter system view system-view —Enable the cluster functionglobally cluster enableOptionalBy default, the cluster functionis enabled.Accessing the shared FTP/TFTP server from a member deviceFollow these steps to access the shared FTP/TFTP server from a member device:To do… Use the command… RemarksAccess the shared FTP serverof the cluster ftp cluster OptionalAvailable in user viewDownload a file from the sharedTFTP server of the clustertftp cluster get source-file [destination-file ]OptionalAvailable in user viewUpload a file to the sharedTFTP server of the clustertftp cluster put source-file [destination-file ]OptionalAvailable in user viewManaging a Cluster through the Management DeviceYou can manage the member devices through the management device, for example, adding/removinga cluster member, rebooting a member device, logging into a member device, and so on.Follow these steps to manage a cluster through management device:To do… Use the command… RemarksEnter system view system-view —Enter cluster view cluster —Add a candidate device to theclusteradd-member[ member-number ]mac-address H-H-H [password password ]OptionalRemove a member device fromthe clusterdelete-membermember-number OptionalReboot a specified memberdevicereboot member {member-number |mac-address H-H-H }[ eraseflash ]Optional48-16
