z If both the limit on the number of MAC address authusers configured in the port security function areconfigured limits is adopted as the maximum nuto access this port. Refer to the Port Securityentication users and the limit on the number ofconfigured for a port, the smaller value of the twomber of MAC address authentication users allowedmanual for the description on the port securityfunction.z You cannot configure the maximum number of MAC address authentication users for a port if anyport is online.user connected to thisDisp uthenticationConlaying and Maintaining MAC Address AfigurationTo do... Use the command... RemarksDisplay global or on-porttiondisplay mac-authentication [ interfaceinterface-list ]Available in anyviewinformation about MACaddress authenticaClear the statistics of global or reset maon-port MAC address [ interfaceauthentication interface-number ]c-authentication statisticsinterface-type Available in userviewMAC Address Authentication Configuration ExamplesNete 35-1work requirementsAs illustrated in Figur , a supplicant is connected to the switch through port Ethernet 1/0/2.ired on port Ethernet 1/0/2 to control user access to thet. The authentication performed is locally and the MAC-44-c1) is used as both the user name and password.Netz MAC address authentication is requInternet.All users belong to domain aabbcc.nezaddress of the PC (00-0d-88-f6work DiagramFigure 35-1 Network diagram for MAC address authentication configurationConfiguration ProcedureC address authentication on port Ethernet 1/0/2. system-view[Sysname] mac-authentication interface Ethernet 1/0/2# Enable MA35-7
