DUA1640-5AAA027-16 C HAPTER 7: M ANAGEMENT U SING THE W EB INTERFACESwitch Configuration This page is used to select which cascaded segments the activesegment switch is attached to. Click on the checkboxes to connect orisolate the switch as necessary.This functionality is only available for the PS Hub 50.For information on the segment switch, refer to “How Does theSegment Switch Work?” on page 2-3.To add or edit the permanent address entries in the active segmentswitch’s database, click Permanent Address Management. ThePermanent Address Management page is displayed.Permanent AddressManagementThis page is used to add or edit permanent addresses in the activesegment switch’s database, as shown in Figure 7-11.Figure 7-11 Permanent Address Management PageThe fields are:MAC Address The MAC address of the device.Segment The cascaded segment to which the device is connected.Adding and Deleting Permanent AddressesTo add a permanent address to the switch database, click Add.The Add a Permanent Address page is displayed. Enter the MACaddress of the device and the cascaded segment to which the device isconnected, and then click Add Address to Switch Port.To delete a permanent address from the switch database, click on theentry in the list and then click Delete. The permanent address is madenon-permanent. Non-permanent addresses are removed from thesegment database (known as ageing) if they are not used.
