DUA1640-5AAA02Using the Serial Web Utility C-36 When you have finished, the final installation dialog box is displayedinforming you that the serial web utility has been installed on yourmanagement station. Click Finish to close the dialog box.7 You are asked if you want to restart Windows ‘95 so that it can usethe new settings you have configured. You must restart Windows ‘95before running the serial web utility.When you return to the Windows ‘95 desktop, the serial web utilityshortcut (‘Serial Web Management’) created by the installation programis visible. The utility also has its own program group called ‘Serial Web’under the default program group specified during the install, whichcontains:n Serial Web Management — Launches the serial web utility.n Serial Web Setup — Displays the Advanced ConfigurationParameters dialog box, which allows you to view and change someof the settings the serial web utility uses when it is run.n License agreement.Using the SerialWeb UtilityEvery time you want to access the web interface through a serial link,make your management connection (refer to “Web Interface” on page5-12) and use the serial web utility to set up your connection:1 Either:n Double-click on the Serial Web Management shortcut.n Select the Serial Web Management program item in the Serial Webprogram group.2 The serial web utility opens and asks you if you want to use the URLthat has been set up. The URL includes the hub’s SLIP address. Forexample, if the SLIP address for the hub is ‘192.168.101.1’, the URL is:http://192.168.101.1/If you want to change the URL, click URL. If the URL is correct, clickOK.3 The serial web utility attempts to establish a connection.If successful, the standard Windows ‘95 Dial-Up Networking dialogbox is displayed, showing the various connection details. Your defaultweb browser is then launched with the specified URL.
