C S ERIAL WEB UTILITYIntroduction If you are using a management station running MicrosoftWindows ® ‘95 and want to access the web interface through the PSHub’s console port, you must use the 3Com serial web utility (SLIPDriver) supplied on the CD-ROM that accompanies the hub.Every time you want to access the web interface, use the serial webutility to set up the connection to the web interface; it launches yourweb browser and accesses the web interface using SLIP for you.If you have any problems accessing the hub’s web interface using theserial web utility, refer to “Solving Problems With the Serial WebUtility” on page C-4.Installing theSerial Web UtilityThe serial web utility can be installed on to a management station thatalready has other Transcend management applications installed on it.The default directory into which the serial web utility is installed isC:\Program Files\3Com\3Com Serial Web.This can be changed during the installation if required.The installation program is a standard Windows based installation.To install the serial web utility:1 Start Windows ‘95.If you already have an existing Transcend ® management applicationrunning, ensure that it is closed down.2 Insert the CD-ROM into your CD-ROM drive.3 Select Run from the Start menu.
