DUA1640-5AAA02Commands 6-11Initializing the Stack Initializing the stack causes it to return to its factory default settings.You may want to do this if the stack has been previously used in adifferent part of your network, and its settings are incorrect for its newenvironment.CAUTION: Initializing the stack removes all configuration informationincluding security, resilient links and passwords. However, IP, SLIP anddefault router information is retained to ensure you can continuemanagement communication with the stack over the network.To initialize the stack:1 At the top-level menu, enter:system initialize2 The CLI asks you to confirm the initialize. Enter y if you wish toproceed, or n if you want to stop the initialize.The stack’s passwords return to the default passwords.Configuring AnotherUnit in the StackThe unit command allows you log on to another unit in the stackwithout disconnecting from the current unit.To configure another unit:1 At the top-level menu, enter:system unitYou are prompted for the unit’s number (note that the commanddisplays the number of the unit that you are currently configuring):Select unit (1):2 Enter the unit’s number.When you have finished configuring the unit, simply log out to returnto the previous unit.
