1-7undo default local-preferenceViewIPv4 MBGP address family viewDefault Level2: System levelParametersvalue: Default local preference, in the range 0 to 4294967295. The larger the value is, the higher thepreference is.DescriptionUse the default local-preference command to configure the default local preference.Use the undo default local-preference command to restore the default.By default, the default local preference is 100.Using this command can affect MBGP route selection.Examples# In IPv4 MBGP address family view, set the default local preference to 180. system-view[Sysname]bgp 100[Sysname-bgp]ipv4-family multicast[Sysname-bgp-af-mul]default local-preference 180default med (MBGP family view)Syntaxdefault med med-valueundo default medViewIPv4 MBGP address family viewDefault Level2: System levelParametersmed-value: Default MED value, in the range 0 to 4294967295.DescriptionUse the default med command to specify the default MED value.Use the undo default med command to restore the default.By default, the default MED value is 0.Multi-exit discriminator (MED) is an external metric for routes. Different from local preference, MED isexchanged between ASs and will stay in the AS once it enters the AS. The route with a lower MED is
