1-27[Sysname-Ethernet2/0/1] apply poe-profile name abcpoe max-power (system view)Syntaxpoe max-power max-power [ pse pse-id ]undo poe max-power [ pse pse-id ]ViewSystem viewDefault Level2: System levelParametersmax-power: Maximum power in watts of the PSE. Support for the range and default value of thisargument depends on the device model.pse pse-id: Specifies a PSE ID.DescriptionUse the poe max-power command to configure the maximum power for the PSE.Use the undo poe max-power command to restore the default maximum power of the PSE.The default maximum power of the PSE is 806 watts.Note that:z The maximum power of the PSE must be greater than or equal to the sum of the maximumpower of all critical PoE interfaces on the PSE so as to guarantee the power supply to these PoEinterfaces. When the consumption power of all PDs connected to the PSE is greater than themaximum power of the PSE, some PDs will be powered off.z The sum of the maximum power of all PSEs cannot exceed the maximum PoE power.Related commands: poe priority (system view).Examples# Set the maximum power of PSE 7 to 150 watts. system-view[Sysname] poe max-power 150 pse 7poe modeSyntaxpoe mode { signal | spare }undo poe modeViewPoE interface view, PoE-profile file view
