1-4 system-view[Sysname] mpls l2vpn vpn1[Sysname-mpls-l2vpn-vpn1] ce ce1[Sysname-mpls-l2vpn-ce-vpn1-ce1] connection ce-offset 1 interface vlan-interface 10display bgp l2vpnSyntaxdisplay bgp l2vpn { all | group [ group-name ] | peer [ [ ip-address ] verbose ] | route-distinguisherroute-distinguisher [ ce-id ce-id [ label-offset label-offset ] ] }ViewAny viewDefault Level1: Monitor levelParametersall: Displays all L2VPN information.group-name: Name of the peer group, a string of 1 to 47 characters.ip-address: IP address of the peer.verbose: Displays detailed information.route-distinguisher: Route distinguisher in the format of nn:nn or IP-address:nn. It can be a string of 3 to21 characters.ce-id: VPN CE ID of the MPLS L2VPN connection, in the range 0 to 199. A remote connection requiresthe remote CE number.label-offset: Label offset, in the range 0 to 65,535.DescriptionUse the display bgp l2vpn command to display information about BGP L2VPN in the BGP routingtable.Related commands: route-distinguisher.Examples# Display all information about L2VPN in the BGP routing table. display bgp l2vpn allBGP Local router ID : 2.2.2.9, local AS number : 100Origin codes:i - IGP, e - EGP, ? - incompletebgp.l2vpn: 1 destinationRoute Distinguisher: 100:1CE ID Label Offset Label Base nexthop pref as-path1 0 8202 3.3.3.9 100
