1-6z When you configure the undo command-privilege view command, the value of the commandargument can be an abbreviated form of the specified command, that is, you only need to enter thekeywords at the beginning of the command. For example, after the undo command-privilege viewsystem ftp command is executed, all commands starting with the keyword ftp (such as ftp serveracl, ftp server enable, and ftp timeout) will be restored to the default level; if you have modified thecommand level of commands ftp server enable and ftp timeout, and you want to restore only the ftpserver enable command to its default level, you should use the undo command-privilege viewsystem ftp server command.z If you modify the command level of a command in a specified view from the default command levelto a lower level, remember to modify the command levels of the quit command and thecorresponding command that is used to enter this view. For example, the default command level ofcommands interface and system-view is 2 (system level); if you want to make the interfacecommand available to the users with the user privilege level of 1, you need to execute the followingthree commands: command-privilege level 1 view shell system-view, command-privilege level 1view system interface ethernet 2/0/1, and command-privilege level 1 view system quit, so that thelogin users with the user privilege level of 1 can enter system view, execute the interface ethernetcommand, and then return to user view.Examples# Set the command level of the interface command to 0 in system view. system-view[Sysname] command-privilege level 0 view system interfacedisplay clipboardSyntaxdisplay clipboardViewAny viewDefault Level1: Monitor levelParametersNoneDescriptionUse the display clipboard command to view the contents of the clipboard.To copy the specified content to the clipboard:Move the cursor to the starting position of the content and press the combination(“,” is an English comma).Move the cursor to the ending position of the content and press the combination(“.” is an English dot) to copy the specified content to the clipboard.Examples# View the content of the clipboard.
