1-15 display ospfv3 peer statisticOSPFv3 Router with ID (1.1.1.1) (Process 1)Neighbor Statistics----------------------------------------------------------------------Area ID Down Init 2-way ExStar Exchange Loading Full0.0.0.0 0 0 0 0 0 0 1Total 0 0 0 0 0 0 1Table 1-9 display ospfv3 peer statistic command output descriptionField DescriptionArea ID Area IDDown In this state, neighbor initial state, the router has not received any information froma neighboring router for a period of time.Init In this state, the device received a Hello packet from the neighbor but the packetcontains no Router ID of the neighbor. Mutual communication is not setup.2-Way Indicates mutual communication between the router and its neighbor is available.DR/BDR election is finished under this state (or higher).ExStart In this state, the router decides on the initial DD sequence number andmaster/slave relationship of the two parties.Exchange In this state, the router exchanges DD packets with the neighbor.Loading In this state, the router sends LSRs to request the neighbor for needed LSAs.Full Indicates LSDB synchronization has been accomplished between neighbors.Total Total number of neighbors under the same statedisplay ospfv3 request-listSyntaxdisplay ospfv3 [ process-id ] request-list [ { external | inter-prefix | inter-router | intra-prefix | link |network | router } [ link-state-id ] [ originate-router ip-address ] | statistics ]ViewAny viewDefault Level1: Monitor levelParametersprocess-id: OSPFv3 process ID, in the range 1 to 65535.external: Displays the AS-external LSA information of the OSPFv3 link state request list.inter-prefix: Displays the Inter-area-prefix LSA information of the OSPFv3 link state request list.inter-router: Displays the Inter-area-router LSA information of the OSPFv3 link state request list.intra-prefix: Displays the Intra-area-prefix LSA information of the OSPFv3 link state request list.link: Displays the Link LSA information of the OSPFv3 link state request list.
