1-13rmon eventSyntaxrmon event entry-number [ description string ] { log | log-trap log-trapcommunity | none | traptrap-community } [ owner text ]undo rmon event entry-numberViewSystem viewDefault Level2: System levelParametersentry-number: Event entry index, in the range 1 to 65,535.description string: Event description, a string of 1 to 127 characters.log: Logs the event when it occurs.log-trap log-trapcommunity: Log and trap events. The system performs both logging and trap sendingwhen the event occurs. log-trapcommunity indicates the community name of the network managementstation that receives trap messages, a string of 1 to 127 characters.none: Performs no action when the event occurs.trap trap-community: Trap event. The system sends a trap with a community name when the eventoccurs. trap-community specifies the community name of the network management station thatreceives trap messages, a string of 1 to 127 characters.owner text: Owner of the entry, a string of 1 to 127 characters. It is case sensitive and space issupported.DescriptionUse the rmon event command to create an entry in the RMON event table.Use the undo rmon event command to remove a specified entry from the RMON event table.When create an event entry, you can define the actions that the system will takes when the event istriggered by its associated alarm in the alarm table. According to your configuration, the system can logthe event, send a trap, do both, or do neither at all.Related commands: display rmon event, rmon alarm, rmon prialarm.z When you create an entry, if the values of the specified event description (description string),event type (log, trap, logtrap or none), and community name (trap-community orlog-trapcommunity) are identical to those of the existing event entry, the system considers theirconfigurations are the same and the creation fails.z You can create up to 60 alarm entries.
