2-20Connected to 192.168.1.50.220 FTP service ready.User(192.168.1.50:(none)):aa331 Password required for aa.Password:230 User logged in.[ftp]open ipv6Syntaxopen ipv6 server-address [ service-port ] [ -i interface-type interface-number ]ViewFTP client viewDefault Level3: Manage levelParametersserver-address: IP address or host name of the remote FTP server.service-port: Port number of the remote FTP server, in the range 0 to 65535. The default value is 21.-i interface-type interface-number: Specifies the egress interface by its type and number. Thisparameter can be used only in case that the FTP server address is a link local address and the specifiedegress interface must have a link local address (For the configuration of link local addresses, see IPv6Basics in the IP Services Volume).DescriptionUse the open ipv6 command to log in to the IPv6 FTP server in FTP client view.At login, you will be asked to enter the username and password for accessing the FTP server. If yourinput is correct, the login succeeds; otherwise, it fails.Related commands: close.Examples# Log in to the FTP server (with IPv6 address 3000::200) in FTP client view. ftp[ftp] open ipv6 3000::200Trying 3000::200 ...Press CTRL+K to abortConnected to 3000::200.220 Welcome!User(3000::200:(none)): MY_NAME331 Please specify the password.Password:230 Login successful.
