Chapter 9. Maintaining Units160 3ware Serial ATA RAID Controller User GuideTo add a task schedule slot1 Choose Management > Schedule from the menu bar.The Scheduling page appears, showing the schedule for Rebuild/MigrateTasks.2 To view Verify Tasks or Self-test Tasks, select it from the drop-down listat the top of the page.3 Scroll to the section of the Scheduling page that shows the task you wantto add.4 In the fields at the bottom of the section, select the Day, Time, andDuration for the task.5 Click the Add New Slot button.The page refreshes and the new schedule is added to the list.Selecting Self-tests to be PerformedTwo self-tests can be set: one to check whether UDMA Mode can beupgraded, and another to check whether SMART thresholds have beenexceeded. (For more information about these self-tests, see the 3DMReference section, “Scheduling page” on page 199.)Initially, these tests are set to run every 24 hours. You can change the schedulefor when they are run, and you can disable the tests, if you prefer not have tohave them performed.To select self-tests to be performed1 Choose Management > Schedule from the menu bar.The Scheduling page appears, showing the schedule for Rebuild Tasks.2 Select Self-test Tasks from the drop-down list at the top of the page.Note: The scheduled tasks can be added in any order. For example a new taskscheduled for Tuesday (slot-2) will preempt the task originally scheduled forWednesday (slot-1).Note: These tasks will only be run during scheduled times if they are checked inthe Schedule Self-tests section of the Scheduling page. If neither of the tasks ischecked, self-tests will never run, even if you have scheduled time slots set.
