Working with the 3DM Screenswww.3ware.com 71Viewing 3DM Remotely Using a Web BrowserWhen remote administration is enabled on the 3DM 2 Settings page, you canuse 3DM to check status and administer your 3ware RAID controller from abrowser on any computer, over an internet connection.You do not need to install the 3DM software on the remote computer.To connect to 3DM2 through your web browser• In the address line of your browser, enter the URL or IP of the systemcontaining the 3ware RAID controller.If you do not know the URL or IP for the system, you can contact yournetwork administrator or from a Windows command prompt, typeipconfig. From a Linux command prompt, type ifconfig.Working with the 3DM Screens3DM’s features are organized on a series of pages you view in your browser.After you log in to 3DM, the Summary page shows a list of controllersinstalled in the computer at the URL you specified.Note: When using 3DM to access a remote system, the time on thelocal system must match the time on the file server. If the time variesby more than 30 minutes, it will not be possible to remotely monitorthe system (you will not be able to log in). If you are in a different timezone, you must first change the time of the local system to match thetime of the remote system.Note: If you expect to see a controller that is not listed, it may not be compatiblewith the driver that is loaded; a firmware flash upgrade may be required.
