Controller Summary pagewww.3ware.com 187Controller Summary pageFigure 88. Controller Summary PageThe Summary page appears after you first logon to 3DM, and when you clickthe Summary link in the menu bar.This page provides basic information about each 3ware RAID controller inyour system. To see details about the units in a controller, click the link in theID column.ID. The ID that the operating system assigns to the controller.Model. The model name of the controller. (The model number is also printedon a sticker on the outside bracket of the controller.)Serial #. The serial number of the controller. (The serial number is alsoprinted on a sticker on the outside bracket of the controller.)Firmware. The firmware version running on the controller.Driver. The driver version being used to interact with the controller.Status. The overall status of the controller. Possible statuses include OK,Warning, Error, and No Units. Warning indicates that a background task iscurrently being performed (rebuilding, migrating, or initializing). Errorindicates that a unit is degraded or inoperable. If both Error and Warningconditions exist, the status will appear as Error. For more information, see“Checking Unit and Drive Status through 3DM” on page 133.Note: The controller ID you see in 3DM 2 may not match the number that you seefor the same controller in 3DM version 1.x.