Chapter 11. 3DM 2 Reference192 3ware Serial ATA RAID Controller User GuideDrive Information pageFigure 92. Drive Information PageThe Drive Information page appears when you choose Information > DriveInformation from the menu bar, or when you click a port # on the Unit Detailspage. If you arrive at this page from the port # hyperlink on the UnitInformation page, the line showing the port # you clicked on is highlighted.This page shows a list of drives on the current controller and a summary ofeach one.To see additional detail about a particular drive in the Drive Details window,including the SMART data, whether NCQ is supported and enabled, and theSATA Link speed, click the link in the Port # column.Port #. The port to which the drive is connected.Model. The model of the drive.Capacity. The physical capacity of the drive. (Note that the capacity as shownon 3DM screen is calculated as 1KB = 1024. This amount may differ from thecapacity that is printed on the disk drive, where it typically has beencalculated as 1K = 1000. Consequently, the capacity of the drive may appearsmaller in the 3DM screens. No storage capacity is actually lost; the size hassimply been calculated differently for consistency.)Serial #. The serial number of the drive.Firmware. The firmware version of the drive.Unit. The unit the drive belongs to, if applicable.Status. The status of the drive: OK, Not Supported, Not Present, and so forth.If you need help regarding a status displayed here, please contact TechnicalSupport. For more information, see “Drive Statuses” on page 137.
