Exiting the 3BM Configuration Utilitywww.3ware.com 59Exiting the 3BM Configuration UtilityWhen you are ready to exit the 3BM configuration utility, you have the optionto save the configuration changes you have made, or to discard the changes.To save your configuration modifications1 Press the F8 or Esc key.A list of affected drives appears, and a messages ask you to confirm theconfiguration.2 Type Y.The booting process resumes.To exit without saving changes1 Press Esc.2 If you have unsaved changes, 3BM will ask you whether you want to savethe changes and exit, or exit without saving the changes.If you want to exit without saving changes, type N.If you change your mind and want to save the changes, type Y.Note: If you have a combination of 7000/8000-series and 9000-series controllers inyour system, the 7000/8000-series controllers are not listed on the selection screenshown in Figure 28. Instead, an additional BIOS summary will appear for the 7000/8000-series controller, similar to Figure 27. To access the BIOS utility for the 7000/8000-series board, press Alt-3 when the information for that controller appears.Although similar to 3BM, some screens and features are different for the 7000/8000-series. For detailed information, see the version of the 3ware Escalade ATARAID Controller User Guide that supports the 7000 and 8000 series controllers.If you have two 9000 series controllers that have different versions of the BIOSinstalled, they will also appear in different BIOS summaries, and will launch differentversions of 3BM.Exception: Changes made to controller policies are saved when you leave thePolicy screen. Pressing F8 is not required to save those changes. For more aboutchanging policies, see “Setting the Auto Rebuild Policy” on page 85.
