Actual signals and parameters 17912Actual signals and parametersWhat this chapter containsThe chapter describes the actual signals and parameters and gives the fieldbusequivalent values for each signal/parameter. It also contains a table of the defaultvalues for the different macros.Terms and abbreviationsFieldbus addressesFor FCAN-01 CANopen adapter module, FDNA-01 DeviceNet adapter module,FECA-01 EtherCAT adapter module, FENA-01 Ethernet adapter module, FEPL-02Ethernet POWERLINK adapter module, FMBA-01 Modbus adapter module, FLON-01 LonWorks® adapter module, and FPBA-01 PROFIBUS DP adapter module, seethe user’s manual of the adapter module.Term DefinitionActual signal Signal measured or calculated by the drive. Can be monitored by the user.No user setting possible. Groups 01…04 contain actual signals.Def Parameter default valueParameter A user-adjustable operation instruction of the drive. Groups 10…99 containparameters.Note: Parameter selections are shown on the basic control panel as integervalues. For example, parameter 1001 EXT1 COMMANDS selection COMMis shown as value 10 (which is equal to the fieldbus equivalent FbEq).FbEq Fieldbus equivalent: The scaling between the value and the integer used inserial communication.E Refers to types 01E- and 03E- with European parametrizationU Refers to types 01U- and 03U- with US parametrization
