262 Actual signals and parameters3305 PARAMETERTABLEDisplays the version of the parameter table used in thedrive.0000…FFFFhexFor example, 400E hex34 PANEL DISPLAY Selection of actual signals to be displayed on the panel3401 SIGNAL1PARAMSelects the first signal to be displayed on the control panelin the Output mode.1030 = NOTSELECTED101…181Parameter index in group 01 OPERATING DATA. Forexample, 102 = 0102 SPEED. If value is set to 0, no signalis selected.1 = 13402 SIGNAL1 MIN Defines the minimum value for the signal selected byparameter 3401 SIGNAL1 PARAM.Note: Parameter is not effective if parameter 3404OUTPUT1 DSP FORM setting is DIRECT.-x…x Setting range depends on parameter 3401 setting. -3403 SIGNAL1 MAX Defines the maximum value for the signal selected byparameter 3401 SIGNAL1 PARAM. See the figure forparameter 3402 SIGNAL1 MIN.Note: Parameter is not effective if parameter 3404OUTPUT1 DSP FORM setting is DIRECT.-x…x Setting range depends on parameter 3401 setting. -All parametersNo. Name/Value Description Def/FbEqAssistant control panel0137013801393404 3405DIR MENU00:00LOC 15.0Hz15 0 Hz.3 7 A.17 3 %.3402SourcevalueDisplayvalue340734063403
