Actual signals and parameters 25932 SUPERVISION Signal supervision. Supervision status can be monitoredwith relay or transistor output. See parameter groups 14RELAY OUTPUTS and 18 FREQ IN & TRAN OUT.3201 SUPERV 1PARAM Selects the first supervised signal. Supervision limits aredefined by parameters 3202 SUPERV 1 LIM LO and 3203SUPERV 1 LIM HI.Example 1: If 3202 SUPERV 1 LIM LO < 3203 SUPERV 1LIM HICase A = 1401 RELAY OUTPUT 1 value is set to SUPRV1OVER. Relay energizes when value of the signal selectedwith 3201 SUPERV 1 PARAM exceeds the supervision limitdefined by 3203 SUPERV 1 LIM HI. The relay remainsactive until the supervised value drops below the low limitdefined by 3202 SUPERV 1 LIM LO.Case B = 1401 RELAY OUTPUT 1 value is set to SUPRV1UNDER. Relay energizes when value of the signal selectedwith 3201 SUPERV 1 PARAM drops below the supervisionlimit defined by 3202 SUPERV 1 LIM LO. The relay remainsactive until the supervised value rises above the high limitdefined by 3203 SUPERV 1 LIM HI.103All parametersNo. Name/Value Description Def/FbEqtttHI par. 3203Value of supervised parameterLO par. 3202Energized (1)Energized (1)00Case ACase B
