208 Actual signals and parameters1405 RO 1 OFFDELAYDefines the release delay for relay output RO 1. 0.0 s0.0…3600.0 s Delay time. See the figure for parameter 1404 RO 1 ONDELAY.1 = 0.1 s1406 RO 2 ONDELAY See parameter 1404 RO 1 ON DELAY. 0.0 s1407 RO 2 OFFDELAYSee parameter 1405 RO 1 OFF DELAY. 0.0 s1408 RO 3 ONDELAY See parameter 1404 RO 1 ON DELAY. 0.0 s1409 RO 3 OFFDELAYSee parameter 1405 RO 1 OFF DELAY. 0.0 s1410 RELAYOUTPUT 4See parameter 1401 RELAY OUTPUT 1. Available only ifthe MREL-01 output relay extension module is connected tothe drive. See parameter 0181 EXTENSION.NOT SEL1413 RO 4 ONDELAYSee parameter 1404 RO 1 ON DELAY. 0.0 s1414 RO 4 OFFDELAYSee parameter 1405 RO 1 OFF DELAY. 0.0 s15 ANALOGOUTPUTSSelection of the actual signals to be indicated throughanalog output and output signal processing.1501 AO1CONTENT SELConnects a drive signal to analog output AO. 103x…x Parameter index in group 01 OPERATING DATA. Forexample, 102 = 0102 SPEED.1502 AO1CONTENT MINDefines the minimum value for the signal selected withparameter 1501 AO1 CONTENT SEL.AO minimum and maximum correspond to the 1504MINIMUM AO1 and 1505 MAXIMUM AO1 settings asfollows:-x…x Setting range depends on the parameter 1501 AO1CONTENT SEL setting.-All parametersNo. Name/Value Description Def/FbEq150515041502 1503150515041503 1502AOcontentAO (mA) AO (mA)AOcontent
