Name Type Values (Range) Unit DescriptionDIR_A Enum 0=unknown1=forward2=backward3=bothDirection phase ADIR_B Enum 0=unknown1=forward2=backward3=bothDirection phase BDIR_C Enum 0=unknown1=forward2=backward3=bothDirection phase CANGLE_A FLOAT32 -180.00...180.00 deg Calculated angledifference, Phase AANGLE_B FLOAT32 -180.00...180.00 deg Calculated angledifference, Phase BANGLE_C FLOAT32 -180.00...180.00 deg Calculated angledifference, Phase CDPHHPDOC Enum 1=on2=blocked3=test4=test/blocked5=offStatus4.1.3.11 Technical dataTable 209:DPHxPDOC Technical dataCharacteristic ValueOperation accuracy Depending on the frequency of the current/voltage measured: fn ±2 HzDPHLPDOC Current:±1.5% of the set value or ±0.002 x InVoltage:±1.5% of the set value or ±0.002 x UnPhase angle: ±2°DPHHPDOC Current:±1.5% of the set value or ±0.002 x In(at currents in the range of 0.1…10 x In)±5.0% of the set value(at currents in the range of 10…40 x In)Voltage:±1.5% of the set value or ±0.002 x UnPhase angle: ±2°Start time1)2) Minimum Typical MaximumIFault = 2.0 x setStartvalue 38 ms 43 ms 46 msReset time < 40 msReset ratio Typical 0.96Retardation time < 35 msTable continues on next page1YHT530004D05 D Section 4Protection functions615 series 199Technical Manual
