6.6.5 ApplicationThe uncorresponding circuit breaker position means that the actual position of thecircuit breaker’s control switch is unmatched with the real position of the circuitbreaker. In a normal situation, the function is used in cooperation with theautoreclose function (DARREC). The operate signal can start the autoreclosingwhen detecting that the circuit breaker has opened in an unknown situation. If thefunction is used as a stand-alone function when an unknown circuit breaker open isdetected, the function output can be used as an information indication for thesupervision station.6.6.6 SignalsTable 521:UPSCBR Input signalsName Type Default DescriptionCB_OPEN_CMD BOOLEAN 0=False CB open command, commonCB_POSCLOSE BOOLEAN 0=False CB position closedCB_POSOPEN BOOLEAN 0=False CB position openSI_PWR_ON BOOLEAN 0=False Signal power onTable 522:UPSCBR Output signalsName Type DescriptionOPERATE BOOLEAN Operate6.6.7 SettingsTable 523:UPSCBR Non group settingsParameter Values (Range) Unit Step Default DescriptionOperation 1=on5=off1=on Operation Off / OnCB open hold delay 300...500 ms 1 300 CB open hold delay timeOperate pulse time 100...20000 ms 1 100 Operate pulse timeSignal pwr on delay 300...500 ms 1 300 Signal power on delay time6.6.8 Technical dataTable 524:UPSCBR Technical dataCharacteristic ValueOperate time accuracy ±1.0% of the set value or ±20 ms1YHT530004D05 D Section 6Supervision functions615 series 605Technical Manual
