Table 22:Settings for calibration parametersSetting Short Description SelectedvalueCommentsIMagComp5 Magnitude factor to calibratecurrent at 5% of In0.00IMagComp30 Magnitude factor to calibratecurrent at 30% of In0.00IMagComp100 Magnitude factor to calibratecurrent at 100% of In0.00VAmpComp5 Magnitude factor to calibratevoltage at 5% of Vn0.00VMagComp30 Magnitude factor to calibratevoltage at 30% of Vn0.00VMagComp100 Magnitude factor to calibratevoltage at 100% of Vn0.00IAngComp5 Angle calibration for current at 5%of In0.00IAngComp30 Angle pre-calibration for currentat 30% of In0.00IAngComp100 Angle pre-calibration for currentat 100% of In0.0014.5 Event counter CNTGGIO14.5.1 IdentificationFunction description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberEvent counter CNTGGIOS00946 V1 EN-14.5.2 ApplicationEvent counter (CNTGGIO) has six counters which are used for storing the number oftimes each counter has been activated. CNTGGIO can be used to count how many timesa specific function, for example the tripping logic, has issued a trip signal. All six countershave a common blocking and resetting feature.14.5.3 Setting guidelinesOperation: Sets the operation of Event counter (CNTGGIO) Enabled or Disabled.1MRK 506 334-UUS A Section 14Monitoring437Application manual
