AEMC OX III Series User Manual

Multimeter Mode - DisplaySCOPIX V - 105Multimeter Mode (cont'd)2. Channel (x)multimeter)There is a display area reserved for each of the instrument's channels. In eachof these, the following information is indicated:Channel CH1, CH2, CH3 or CH4Coupling The input coupling selected (see §. Vert. Menu) is indicated in this field. Forthe Ohmmeter, Capacimeter, Continuity, Component Test, Wattmeter, thecoupling is not shown.Autorange Indicates whether range changing is automatic.Symbols A symbol is displayed corresponding to the type of selected measurement :Ohmmeter,╫ Capacimeter,;Ò ContinuityComponent testPT100 Temperature measurementMainmeasurementIf the channel is activated, the measurement result is displayed. Otherwise, themessage ‘– X –‘ fills the unused space.Unit Contains the measurement unit associated with the current measurementrange.SecondarymeasurementSelected through the “Display” menu.* If no display is selected or if the display is not possible (e.g. frequencymeasurement for a continuous signal, etc.), the character string‘-----‘ is displayed.If the channel is not selected, ‘– X –‘ is displayed.3. Cursor valueDisplay of the absolute position of the cursor on the measurement referencechannel.Time position: hour, minute, secondLevel position: depending on the type of measurement.If your instrument is equipped with the "EXTENDED ACQUISITION MEMORY"option, an indication of the zoom status is also displayed (Zoom ON / ZoomOFF) in this zone.Channel SymbolPrincipal measurement UnitSecondary measurementCh. CouplingPrincipal measurement UnitSecondary measurementAuto-ranging SymbolHour; minute; secondLevelCursor (Ref)www.ShopAEMC.comShop for AEMC products online at: 1.877.766.5412