AEMC OX III Series User Manual

Oscilloscope Mode - The "Measure" MenuIV - 88 SCOPIXOscilloscope Mode (cont'd)Unattached manualcursors*Used for linking or not linking the manual measurement cursors (1 and 2)to the reference trace.When the "Unattached cursors" menu is selected, cursors 1 and 2 canbe moved freely over the whole screen.• The "9" symbol indicates that the "Unattached cursors" menu is active.• To deactivate this menu, deselect it by pointing with the stylus.In the case of "Automatic measurements" and manual measurementactivation:If … then …… the manual cursors and theautomatic markers aredisplayed together,… the automatic measurementsare performed on the portion of thetrace defined between the manualcursors.… the portion defined betweenthe manual cursors is toosmall [in this case, the fixedmarkers (+) will not bedisplayed],… the automatic measurementsselected are impossible, so "-.--" isindicated in the measurementdisplay area.* Deselect the automatic measurements to validate the manualmeasurements (dt, dv).www.ShopAEMC.comShop for AEMC products online at: 1.877.766.5412