AEMC OX III Series User Manual

ApplicationsSCOPIX IX - 189Applications (cont’d)b) Hard copy of thescreen on a networkprinterScreen copying can be initiated on a network printer.• Use a suitable ETHERNET cable to link the oscilloscope to the network.• Open the oscilloscope's "Network" menu.• Enter the IP address manually or automatically using the icon "providedby a DHCP server" (if the server is accessible).# Example: 132.147.200.74• Enter the IP address of the network printer using the table of usablenumbers after selecting the zone to be modified.# Example: 132.147.200.74• Specify the name of the required printer (# Example: LaserJet 4)* To find out the IP address of the server or the name of the printer,contact the network administrator responsible for your IT installation.• Then validate the information by choosing OK.• Open the "Hardcopy" menu (See §. “Util” Menu) of the oscilloscope.• According to the printer connected to the network, select the print formator type of printer.* The use of BMP and GIF graphic formats is reserved for printingthrough a "Virtual Printers" LDP type server (see p. IX - 188).• Validate the color or black/white option.• Validate the Network option of the port menu.• Configure the oscilloscope so that it displays the screen as you wish to printit.Start the required print operation by pressing the key opposite.PrinterIP Address =132.147.200.10OscilloscopeIP Address =132.147.200.74ETHERNETnetworkwww.ShopAEMC.comShop for AEMC products online at: 1.877.766.5412