AEMC OX III Series User Manual

Multimeter Mode - DisplayV - 106 SCOPIXMultimeter Mode (cont'd)4. Bargraph*These graphs show the min. and max. values measured on the channels in therange during the observation period.The bargraph is shown with the color of the channel.The zero level of the bargraph and the scale are adapted to suit the type ofmeasurement and the range.If the range is changed, the bargraph is reinitialized and the curve showing theevolution of the measurement is erased.5. Graphic window This window shows the evolution of the measurements as a function of time.The most recent measurement points are those on the right-hand side of thescreen.The depth of the window, which represents the observation period, can beprogrammed using the keys opposite.Adjustments possible: 5’, 15’, 30’, 1hr, 6hrs, 12hrs, 24hrs, 1 week, 1 month.If ROLL mode is activated (see §. "HORIZ" menu), the curves areconstantly updated; if the acquisition memory is full, the oldestmeasurements disappear and are replaced by recent measurements.6. Current settings Identical to OSCILLOSCOPE mode: indication and adjustment of the value ofthe latest parameter modified.LastpointacquiredCursorDepth of thedisplaywindowwww.ShopAEMC.comShop for AEMC products online at: 1.877.766.5412