AEMC OX III Series User Manual

General InstructionsI - 4 SCOPIXGeneral InstructionsIntroduction Congratulations ! You have just purchased a portable digital oscilloscope.Thank you for your trust in the quality of our products.Here is the family of instruments to which it belongs:OX 7102 III color 2-channel 100 MHz 2.5 GS/s sampleOX 7104 III color 4-channel 100 MHz 2.5 GS/s sampleOX 7202 III color 2-channel 200 MHz 2.5 GS/s sampleOX 7204 III color 4-channel 200 MHz 2.5 GS/s sample* All instruments in this range are equipped with Micro SD card.This oscilloscope also offers the following modes:• FFT Analyzer• Multimeter/Wattmeter• Harmonic Analyzer• RecorderIt complies with safety standard NF EN 61010-1 (2001), double insulation,relative to electronic measuring instruments.For optimum service, read this manual carefully and comply with theoperating precautions.Non-compliance with the warnings and/or operating instructions mightdamage the instrument and/or its components and could prove dangerousfor the user.Precautions andsafety measures• This instrument has been designed for use:- indoors- in an environment with pollution level 2- at an altitude of less than 2000 m- at a temperature between 0°C and 40°C- with relative humidity of less than 80% up to 31°C.• The safety of any system integrating the apparatus concerns theresponsibility of the assembler of the system.• It can be used for measurements on circuits 600V CAT III, 1000V CAT IIin relation to earth and can be powered by a 98 to 264V mains network,with an external power supply. However, some accessories can lead youto use this instrument on circuits of lower voltage and category.Conform the given values when connecting the accessory.www.ShopAEMC.comShop for AEMC products online at: 1.877.766.5412