AEMC OX III Series User Manual
                                                                                                                                                                                                                                  | |
Contents
|
Oscilloscope Mode - The KeysSCOPIX IV - 45Oscilloscope Mode (cont'd)Definition of termsusedValidated channel: Display enabled, trace displayed after RUNDisplayed channel: Channel validated, trace present on the screenSelected channel: The parameters of this channel can be set with the keys:5 "VERTICAL" keysor key padsOX 7204 IIIOX 7202 III* A long press on one of the keys CHx causes a vertical autoset:• This modifies the sensitivity and vertical positioning of the channel inquestion.• It optimizes the display on the screen by activating and selecting thechannel.The channel is displayed and selected.andStep 1 Step 2 Step 3Before pressing one of thefollowing keys :After pressing one of thepreceding keys:The channel concerned isnot displayed.The channel is displayed andselected.The vertical sensitivity andvertical position are assignedto the channel selected.The channel concerned isdisplayed, but not selected.The channel is selected.The channel concerned isdisplayed and selected.Press °The channel is cancelled bydouble-pressing.Step 1 Step 2 Step 3Before pressing one of thefollowing keys :After pressing one of thepreceding keys:The channel concerned isnot displayed.The channel is displayed andselected.On CH1 and CH4, the verticalsensitivity and the verticalposition are assigned to thechannel selected.The channel concerned isdisplayed, but not selected.The channel is selected.The channel concerned isdisplayed and selected.Press °The channel is cancelled bydouble-pressing.www.ShopAEMC.comShop for AEMC products online at: 1.877.766.5412 |
Related manuals for AEMC OX 7102 III
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine