AEMC OX III Series User Manual

HTTP and FTP ServerSCOPIX VIII - 1673 - ScopeAdminScopeAdmin It is a utility for supervising a set of METRIX instruments that support aspecific communications protocol.It is an applet that must be run on an instrument server client machine (PC orother).The only instrument on which the IP address must be predefined is theinstrument on which your PC will connect to download the applet. The IPaddress of the other instruments to be managed can be defined usingScopeAdmin.The supervision consists in adjusting the different machine configurationsettings:- the IP parameters,- the print settings,- the configuration settings (language, standby ...).Using ScopeAdmin you can send a message to all connected instruments orto a specific instrument; the message is displayed on the instruments' screen.You can also prohibit access to the configuration settings using the front faceof the instrument and put the connected instruments on standby or stop them.To access ScopeAdmin from the browser installed on your PC type thefollowing in the address bar:http://Instrument IP address/ScopeAdmin.html.A username and password are requested:User: adminPassword: admetri*The ScopeNet applet is then downloaded to the PC and runs in thebrowser.Click on'Find Instruments’to explore yournetwork and displayall connectedinstruments thatsupport ScopeAdmin.www.ShopAEMC.comShop for AEMC products online at: 1.877.766.5412