CHAPTER 3Configuring the Gateway122• Job scheduling - allows to define a time schedule (“Mode”) towhich time the A850 has to perform a time synchronization asclient and/or server;• Job status - for information at which time the last timesynchronization has been performed and with which success,as well as at which time the next time synchronization isplanned;• Job dependent settings - allow to define time synchronizationmeasures for the clients of the Gateway;• Primary Server - allows to define the primary NTP server;• Secondary Server - allows to define the secondary NTP server.Job schedulingNote: The job scheduling layed down can be oversteered by thecommands ”Start Job” or “Stop Job” according to Fig. 43or 46, respectively.Figure 123. NTP Detail - Job schedulingWithin “Job scheduling”, the pull down menu “Mode” providesthe following set-ups to start establishing contacts to NTP servers:• Mode - This combo box is used for determining details of thetime synchronization; the following selections are offered:
